Qos Wfq Weight; Qos Wrr - HP E4510-48G Command Reference Manual

[Sysname-GigabitEthernet1/0/1] qos wfq

qos wfq weight

Syntax
qos wfq queue-id weight schedule-value
undo qos wfq queue-id weight
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
queue-id: ID of the queue, in the range of 0 to 7.
weight schedule-value: Specifies the scheduling weight of a queue, ranges from 0 to 15, and each
queue is allocated with part of the allocable bandwidth based on its scheduling weight.
Description
Use the qos wfq command to enable weighted fair queuing (WFQ) on a port or port group and
configure a scheduling weight for the specified queue.
Use the undo qos wfq command to restore the default.
On a WFQ-enable port/port group, the scheduling weight of a queue is 1 by default.
Related commands: display qos wfq interface, qos bandwidth queue.
Examples
# Enable WFQ on GigabitEthernet 1/0/1 and assign weight values 1, 2, 4, 6, 8, 10, 12, and 14 to
queues 0 through 7.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos wfq 0 weight 1
[Sysname-GigabitEthernet1/0/1] qos wfq 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wfq 2 weight 4
[Sysname-GigabitEthernet1/0/1] qos wfq 3 weight 6
[Sysname-GigabitEthernet1/0/1] qos wfq 4 weight 8
[Sysname-GigabitEthernet1/0/1] qos wfq 5 weight 10
[Sysname-GigabitEthernet1/0/1] qos wfq 6 weight 12
[Sysname-GigabitEthernet1/0/1] qos wfq 7 weight 14

qos wrr

Syntax
qos wrr
undo qos wrr
4-6