Destination Ip; Destination Port - HP E4510-48G Command Reference Manual

<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe

destination ip

Syntax
destination ip ip-address
undo destination ip
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default Level
2: System level
Parameters
ip-address: Destination IP address of a test operation.
Description
Use the destination ip command to configure a destination IP address for a test operation.
Use the undo destination ip command to remove the configured destination IP address.
By default, no destination IP address is configured for a test operation.
Examples
# Configure the destination IP address of an ICMP echo test operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1

destination port

Syntax
destination port port-number
undo destination port
View
TCP, UDP echo, UDP jitter, voice test type view
Default Level
2: System level
Parameters
port-number: Destination port number of a test operation, in the range 1 to 65535.
18-5