Info-Center Source - HP E4510-48G Command Reference Manual

Description
Use the info-center snmp channel command to configure the channel to output system information
to the SNMP module.
Use the undo info-center snmp channel command to restore the default channel to output system
information to the SNMP module.
By default, output of system information to the SNMP module is enabled with a default channel name
of snmpagent and a default channel number of 5.
For more information, refer to the display snmp-agent command in the SNMP Commands in the
System Volume.
Examples
# Output system information to the SNMP module through channel 6.
<Sysname> system-view
[Sysname] info-center snmp channel 6

info-center source

Syntax
info-center source { module-name | default } channel { channel-number | channel-name } [ debug
{ level severity | state state } * | log { level severity | state state } * | trap { level severity | state state }
* ] *
undo info-center source { module-name | default } channel { channel-number | channel-name }
View
System view
Default Level
2: System level
Parameters
module-name: Specifies the output rules of the system information of the specified modules. For
instance, if information on ARP module is to be output, you can configure this argument as ARP. You
can use the info-center source ? command to view the modules supported by the device.
default: Specifies the output rules of the system information of all the modules allowed to output the
system information, including all the modules displayed by using the info-center source ? command.
debug: Debugging information.
log: Log information.
trap: Trap information.
level severity: Specifies the severity of system information, refer to
keyword, you can specify the severity level of the information allowed/denied to output.
state state: Configures whether to output the system information, which could be on (enabled) or off
(disabled). With this keyword, you can specify whether to output the specified system information.
channel-number: Specifies a channel number, in the range 0 to 9.
16-15
Table 16-4 for details. With this