Ipv6 Icmp-Error; Ipv6 Icmpv6 Multicast-Echo-Reply Enable - HP E4510-48G Command Reference Manual

ipv6-address: IPv6 address.
Description
Use the ipv6 host command to configure the mappings between host names and IPv6 addresses.
Use the undo ipv6 host command to remove the mappings between host names and IPv6 addresses.
Each host name can correspond to only one IPv6 address.
Related commands: display ipv6 host.
Examples
# Configure the mapping between a host name and an IPv6 address.
<Sysname> system-view
[Sysname] ipv6 host aaa 2001::1

ipv6 icmp-error

Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error
View
System view
Default Level
2: System level
Parameters
bucket bucket-size: Number of tokens in the token bucket, in the range of 1 to 200.
ratelimit interval: Update period of the token bucket in milliseconds, in the range of 0 to 2,147,483,647.
The update period "0" indicates that the number of ICMPv6 error packets sent is not restricted.
Description
Use the ipv6 icmp-error command to configure the size and update period of the token bucket.
Use the undo ipv6 icmp-error command to restore the defaults.
By default, the size is 10 and the update period is 100 milliseconds. That is, at most 10 ICMPv6 error
packets can be sent within 100 milliseconds.
Examples
# Set the capacity of the token bucket to 50 and the update period to 100 milliseconds.
<Sysname> system-view
[Sysname] ipv6 icmp-error bucket 50 ratelimit 100

ipv6 icmpv6 multicast-echo-reply enable

Syntax
ipv6 icmpv6 multicast-echo-reply enable
12-28