Display Schedule Reboot; Display System-Failure - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

Description
Use the display schedule job command to display the detailed configurations of the scheduled
automatic execution function.
Examples
# Display the detailed configurations of the current scheduled automatic execution function.
<Sysname> display schedule job
Specified command: execute 1.bat
Specified view: system view
Executed time: at 12:00 10/31/2007 (in 0 hours and 16 minutes)
If you modify the system time within 16 minutes, the configurations of scheduled automatic execution
of the batch file will become invalid, and then when you execute the display schedule job command
again, the system displays nothing.

display schedule reboot

Syntax
display schedule reboot
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display schedule reboot command to display the device reboot time set by the user.
Related commands: schedule reboot at and schedule reboot delay.
Examples
# Display the reboot time of a device.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2006 (in 2 hours and 5 minutes).
The above information indicates the system will reboot at 16:00:00 on March 10, 2006 (in two hours
and five minutes).

display system-failure

Syntax
display system-failure
View
Any view
4-17

Advertisement

Table of Contents
loading

Table of Contents