Display Rmon Eventlog - HP E4510-48G Command Reference Manual

Examples
# Display the configuration of RMON event table.
<Sysname> display rmon event
EventEntry 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 12-2 display rmon event command output description
Field
EventEntry
owned by
VALID
Description
cause log-trap when triggered
last triggered at

display rmon eventlog

Syntax
display rmon eventlog [ entry-number ]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number: Index of an event entry, in the range 1 to 65535.
Description
Use the display rmon eventlog command to display log information for the specified or all event
entries.
Event entry, corresponding to the MIB node eventIndex.
Owner of the entry, corresponding to the MIB node eventOwner.
Status of the entry identified by the index (VALID means the entry
is valid, and UNDERCREATION means invalid. You can use the
display rmon command to view the invalid entry; while with the
display current-configuration and display this commands you
cannot view the corresponding rmon commands.),
corresponding to the MIB node eventStatus.
Description for the event, corresponding to the MIB node
eventDescription.
The actions that the system will take when the event is triggered:
none: The system will take no action
log: The system will log the event
snmp-trap: The system will send a trap to the NMS
log-and-trap: The system will log the event and send a trap to
the NMS
This field corresponds to the MIB node eventType.
Time when the last event was triggered, corresponding to the
MIB node eventLastTimeSent.
12-3
Description