HP E4510-48G Command Reference Manual page 932

4510g series
Table of Contents

Advertisement

Field
Maintenance domain
Maintenance association
Level
VLAN
Direction
Administrative state
CCM send
FNG state
CCM
Current state
Interval
SendCCM
Loopback
NextSeqNumber
SendLBR
ReceiveInOrderLBR
ReceiveOutOrderLBR
Linktrace
NextSeqNumber
SendLTR
ReceiveLTM
No CCM from some
remote MEPs is received.
One or more streams of
error CCMs is received.
The last-received CCM:
Maintenance domain
Maintenance association
MEP
Sequence Number
MAC Address
Received Time
MD that a MEP belongs to
MA that a MEP belongs to
Level of the MD
VLAN that the MA belongs to
Direction of the MEPs
State of MEP, either Active or Inactive
Whether the MEP sends CCM
State of FNG (Fault Notification Generator), which can be:
FNG_RESET
FNG_DEFECT
FNG_REPORT_DEFECT,
FNG_DEFECT_REPORTED
FNG_DEFECT_CLEARING
Information related to CCM
State of CCMs sent, which can be:
CCI_IDLE
CCI_WAITING
Interval to send CCM
Number of CCMs that have been sent by the MEPs
Information related to Loopback
Sequence number of the next LBM to be sent
Number of LBRs that have been sent
Number of LBR messages received in correct sequence
Number of LBR messages received out of order
Information related to linktrace
Sequence number of the next LTM to be sent
Number of LTRs sent
Number of LTMs received
Failure to receive CCMs from some remote MEPs (This information is
displayed only when some CCMs are lost.)
Display the content of the last CCM when one or more error CCMs
are received. (This information is displayed only when error CCM(s)
is/are received.)
MD of the last error CCM message
MA of the last error CCM message
ID of the MEP that sent the last error CCM message
Sequence number of the last error CCM
MAC address of the peer that sent the error CCM message
Time when the last error CCM is received
6-18
Description

Advertisement

Table of Contents
loading

Table of Contents