Overflow-Replace (Igmp-Snooping View); Report-Aggregation (Igmp-Snooping View) - HP E4510-48G Command Reference Manual

overflow-replace (IGMP-Snooping view)

Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
View
IGMP-Snooping view
Default Level
2: System level
Parameters
vlan vlan-list: Defines one or multiple VLANs. You can provide up to 10 VLAN lists, by each of which
you can specify an individual VLAN in the form of vlan-id, or a VLAN range in the form of start-vlan-id
to end-vlan-id, where the end VLAN ID must be greater than the start VLAN ID. The effective range of
a VLAN ID is 1 to 4094.
Description
Use the overflow-replace command to enable the multicast group replacement function globally.
Use the undo overflow-replace command to disable the multicast group replacement function
globally.
By default, the multicast group replacement function is disabled.
Note that:
This command works on IGMP Snooping–enabled VLANs.
If you do not specify any VLAN, the command will take effect for all VLANs; if you specify a VLAN
or multiple VLANs, the command will take effect for the specified VLAN(s) only.
Related commands: igmp-snooping overflow-replace.
Examples
# Enable the multicast group replacement function globally in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] overflow-replace vlan 2

report-aggregation (IGMP-Snooping view)

Syntax
report-aggregation
undo report-aggregation
View
IGMP-Snooping view
1-23