Black-List Add-Mac - HP E4510-48G Command Reference Manual

Ensure that NTDP is enabled, because it is the basis of candidate and member collection. The
collection range is also decided through NTDP. You can use the ntdp hop command in system
view to modify the collection range.
If a member is configured with a super password different from the super password of the
management device, it cannot be added to the cluster automatically.
Examples
# Establish a cluster automatically.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] auto-build
There is no base topology, if set up from local flash file?(Y/N)
y
Begin get base topology file from local flash......
Get file error, can not finish base topology recover
Please input cluster name:aabbcc
Collecting candidate list, please wait...
#Jul 22 14:35:18:841 2006 Sysname CLST/5/Cluster_Trap:
OID:1.3.6.1.4.1.2011.6.7.1.0.3: member 0.0.0.0.0.224.252.0.0.0 role change, NTDP
Index:0.0.0.0.0.0.224.252.0.0.0, Role:1
Candidate list:
Name
Processing...please wait
Cluster auto-build Finish!
0 member(s) added successfully.

black-list add-mac

Syntax
black-list add-mac mac-address
View
Cluster view
Default Level
2: System level
Parameters
mac-address: MAC address of the device to be added into the blacklist, in the form of H-H-H.
Description
Use the black-list add-mac command to add a device to the blacklist.
Note that this command can be executed on the management device only.
Hops MAC Address
20-17
Device