Remark Drop-Precedence; Remark Dscp - HP E4510-48G Command Reference Manual

<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2

remark drop-precedence

Syntax
remark drop-precedence drop-precedence-value
undo remark drop-precedence
View
Traffic behavior view
Default Level
2: System Level
Parameters
drop-precedence-value: Drop precedence to be set for packets, in the range 0 to 2.
Description
Use the remark drop-precedence command to configure the action of setting drop precedence for a
traffic behavior.
Use the undo remark drop-precedence command to remove the action of setting drop precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set drop precedence to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark drop-precedence 2

remark dscp

Syntax
remark dscp dscp-value
undo remark dscp
View
Traffic behavior view
Default Level
2: System Level
Parameters
dscp-value: DSCP precedence to be set for packets, in the range of 0 to 63. This argument can also be
the keywords listed in Table 1-4.
1-11