Display User-Bind - HP E4510-48G Command Reference Manual

Table 9-1 display ip check source command output description
Field
Total entries found
MAC
IP
Vlan
Port
Status

display user-bind

Syntax
display user-bind [ interface interface-type interface-number | ip-address ip-address | mac-address
mac-address ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the static bindings of the interface specified by its
type and number.
ip-address ip-address: Displays the static bindings of an IP address.
mac-address mac-address: Displays the static bindings of an MAC address (in the format of H-H-H).
Description
Use the display user-bind command to display static bindings.
With no options specified, the command displays static bindings of all interfaces.
Related commands: user-bind.
Examples
# Display all static bindings.
<Sysname> display user-bind
Total entries found: 4
MAC
N/A
0001-0001-0001
0003-0003-0003
0004-0004-0004
Total number of found entries
MAC address of the dynamic binding. N/A means that no MAC
address is bound in the entry.
IP address of the dynamic binding. N/A means that no IP address
is bound in the entry.
VLAN to which the obtained binding entry belongs. N/A means
that no VLAN is bound in the entry.
Port to which the dynamic binding entry is applied
Type of dynamically obtaining the binding entry
IP Vlan
1.1.1.1 N/A
2.2.2.2 200
N/A N/A
4.4.4.4 N/A
Description
Port
GigabitEthernet1/0/1
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet1/0/2
9-2
Status
Static
Static
Static
Static