Qos Policy - HP E4510-48G Command Reference Manual

Default Level
2: System Level
Parameters
policy-name: Policy name, a case-sensitive string of 1 to 31 characters. No spaces are allowed in a
QoS policy name.
inbound: Applies the QoS policy to the incoming packets on all ports.
Description
Use the qos apply policy global command to apply a QoS policy globally. A QoS policy applied
globally takes effect on all inbound traffic depending on the direction in which the policy is applied.
Use the undo qos apply policy global command to cancel the global application of the QoS policy.
Examples
# Apply the QoS policy user1 in the inbound direction globally.
<Sysname> system-view
[Sysname] qos apply policy user1 global inbound

qos policy

Syntax
qos policy policy-name
undo qos policy policy-name
View
System view
Default Level
2: System Level
Parameters
policy-name: Name of the policy to be created, a case-sensitive string of 1 to 31 characters. No spaces
are allowed in a policy name.
Description
Use the qos policy command to create a policy. This command also leads you to policy view.
Use the undo qos policy command to remove a policy.
To remove a policy that is currently applied on a port, you need to disable it on the port first.
Related commands: classifier behavior, qos apply policy.
Examples
# Create a policy named user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1]
1-22