Display Ipv6 Routing-Table Protocol - HP E4510-48G Command Reference Manual

Description
Use the display ipv6 routing-table ipv6-prefix command to display routes permitted by the IPv6
prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list test2.
<Sysname> display ipv6 routing-table ipv6-prefix test2
Routes Matched by Prefix list test2 :
Summary Count : 1
Destination: 100::/64
NextHop : ::
Interface : NULL0
Refer to Table 1-4

display ipv6 routing-table protocol

Syntax
display ipv6 routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol: Displays routes of a routing protocol, which can be direct, ripng and static.
inactive: Displays only inactive routes. Without the keyword, all active and inactive routes are
displayed.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only
brief active routing information is displayed.
Description
Use the display ipv6 routing-table protocol command to display routes of a specified routing
protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1
for description about the above output.
Protocol : Static
Preference: 60
Cost
1-17
: 0