Ntdp Configuration Commands; Display Ntdp - HP E4510-48G Command Reference Manual

Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument.
Description
Use the reset ndp statistics command to clear NDP statistics.
If no interface interface-list is specified, NDP statistics of all ports are cleared; otherwise, NDP
statistics of a specified port are cleared.
Examples
# Clear NDP statistics of all ports.
<Sysname> reset ndp statistics

NTDP Configuration Commands

display ntdp

Syntax
display ntdp
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ntdp command to display NTDP configuration information.
Examples
# Display the global NTDP information.
<Sysname> display ntdp
NTDP is running.
Hops : 4
Timer : 1 min(disable)
Hop Delay : 100 ms
Port Delay: 10 ms
Last collection total time: 92ms
20-7