HP E4510-48G Command Reference Manual page 1225

Description
Use the frequency command to configure the interval between two consecutive tests for a test group.
Use the undo frequency command to restore the default.
By default, the interval between two consecutive voice tests is 60000 milliseconds, and the interval
between two consecutive tests of other types is 0 milliseconds, that is, only one test is performed.
After you use the nqa schedule command to start an NQA test, one test is started at interval.
If the last test is not completed when the interval specified by the frequency command is reached, a
new test is not started.
Examples
# Configure the interval between two consecutive tests as 1000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] frequency 1000
history-records
Syntax
history-records number
undo history-records
View
Any NQA test type view
Default Level
2: System level
Parameters
number: Maximum number of history records that can be saved in a test group, in the range 0 to 50.
Description
Use the history-records command to configure the maximum number of history records that can be
saved in a test group.
Use the undo history-records command to restore the default.
By default, the maximum number of records that can be saved in a test group is 50.
If the number of history records exceeds the maximum number, the earliest history record for a probe
will be discarded.
Examples
# Configure the maximum number of history records that can be saved in a test group as 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-records 10
18-17