Local-User - HP E4510-48G Command Reference Manual

View
ISP domain view
Default Level
2: System level
Parameters
minute: Maximum idle duration allowed, in the range 1 to 120 minutes.
Description
Use the idle-cut enable command to enable the idle cut function and set the maximum idle duration
allowed. With the idle cut function enabled for a domain, the system will log out any user in the domain
who has been idle for a period greater than the maximum idle duration.
Use the undo idle-cut command to restore the default.
By default, the function is disabled.
Related commands: domain.
Examples
# Enable the idle cut function and set the idle threshold to 50 minutes for ISP domain aabbcc.net.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] idle-cut enable 50

local-user

Syntax
local-user user-name
undo local-user { user-name | all service-type { ftp | lan-access | ssh | telnet | terminal } }
View
System view
Default Level
3: Manage level
Parameters
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain
the domain name. It cannot contain any backward slash (\), forward slash (/), vertical line (|), colon (:),
asterisk (*), question mark (?), less-than sign (<), greater-than sign (>) and the @ sign and cannot be a,
al, or all.
all: Specifies all users.
service-type: Specifies the users of a type.
ftp refers to users using FTP.
lan-access refers to users accessing the network through an Ethernet, such as 802.1X users.
ssh refers to users using SSH.
1-26