Source-Deny (Mld-Snooping View) - HP E4510-48G Command Reference Manual

source-deny (MLD-Snooping view)

Syntax
source-deny port interface-list
undo source-deny port interface-list
View
MLD-Snooping view
Default Level
2: System level
Parameters
interface-list: Port list. You can specify multiple ports or port ranges by providing the this argument in
the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] },
where interface-type is port type and interface-number is port number.
Description
Use the source-deny command to enable IPv6 multicast source port filtering, namely to filter out all
the received IPv6 multicast packets.
Use the undo source-deny command to disable IPv6 multicast source port filtering.
By default, IPv6 multicast source port filtering is disabled.
This command works on MLD Snooping–enabled VLANs.
Examples
# Enable source port filtering for IPv6 multicast data on interfaces GigabitEthernet1/0/1 through
GigabitEthernet1/0/4.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] source-deny port gigabitethernet1/0/1 to gigabitethernet1/0/4
3-26