Shell - HP E4510-48G Command Reference Manual

By default, Telnet users need to provide their passwords to log in. If no password is set, the "Login
password has not been set !" message appears on the terminal when users log in.
Examples
# Set the local password of VTY 0 to "123".
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] set authentication password simple 123

shell

Syntax
shell
undo shell
View
User interface view
Default Level
3: Manage level
Parameters
None
Description
Use the shell command to make terminal services available for the user interface.
Use the undo shell command to make terminal services unavailable to the user interface.
By default, terminal services are available in all user interfaces.
Note the following when using the undo shell command:
This command is available in all user interfaces except the AUX user interface, because the AUX
port (also the Console) is exclusively used for configuring the switch.
This command is unavailable in the current user interface.
This command prompts for confirmation when being executed in any valid user interface.
Examples
# Log into user interface 0 and make terminal services unavailable in VTY 0 through VTY 4.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
1-19