HP E4510-48G Command Reference Manual page 634

Default Level
1: Monitor level
Parameters
isp-name: Name of an existing ISP domain, a string of 1 to 24 characters.
Description
Use the display domain command to display the configuration information of a specified ISP domain
or all ISP domains.
Related commands: access-limit enable, domain, state.
Examples
# Display the configuration information of all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Access-limit = Disable
Accounting method = Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Domain User Template:
Idle-cut = Disabled
Self-service = Disabled
1 Domain = aabbcc
State = Active
Access-limit = Disable
Accounting method = Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Lan-access authentication scheme
Lan-access authorization scheme
Lan-access accounting scheme
Domain User Template:
Idle-cut = Disabled
Self-service = Disabled
Default Domain Name: system
Total 2 domain(s)
Table 1-2 display domain command output description
Domain
: local
: local
: local
: local
: local
: local
: radius=test, local
: hwtacacs=hw, local
: local
Field
1-19
Description
Domain name