Display Reboot-Type - HP E4510-48G Command Reference Manual

Description
Use the display power command to display the status of the power supply of a device.
Examples
# Display the status of the power supply of a device.
<Sysname> display power
Slot 1
Power 1
State : Normal
Type : AC
Slot 2
Power 1
State : Normal
Type : AC

display reboot-type

Syntax
display reboot-type [ slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
slot slot-number: Displays reboot mode of the specified member device, where slot-number
represents the member ID of the device. You can use the display irf command to view the member
IDs of devices in a stack system.
Description
Use the display reboot-type command to display the reboot mode of the device.
If no keyword is provided, the system displays the reboot mode of the master.
Examples
# Display the reboot mode of the device.
<Sysname> display reboot-type
The rebooting type this time is: Cold
The above information indicates that the last reboot mode of the device is Cold boot (cold boot is to
restart a device by powering it on). (The display of Warm represents a warm boot, which means to
restart a device by using the commands like reboot).
4-15