HP E4510-48G Command Reference Manual page 1286

cluster-local-user
Syntax
cluster-local-user username password { cipher | simple } password
undo cluster-local-user username
View
Cluster view
Default Level
1: Monitor level
Parameters
cipher: Indicates that the password is in cipher text.
simple: Indicates that the password is in plain text.
username: Username used for logging onto the devices within a cluster through Web, a string of 1 to
55 characters.
password: Password used for logging onto the devices within a cluster through Web. This password is
a string of 1 to 63 characters when the simple keyword is specified, and can be in either plain text or
cipher text when the cipher keyword is specified. A plain text password must be a string of 1 to 63
characters. The cipher text password must have a fixed length of 24 or 88 characters. The password is
case sensitive.
Description
Use the cluster-local-user command to configure Web user accounts in batches.
Use the undo cluster-local-user command to remove the configuration.
Note that the command can be configured once on the management device only.
Examples
# Configure Web user accounts for the devices within a cluster, with username being abc, password
being 123456 and displayed in plain text.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-local-user abc password simple 123456
cluster-mac
Syntax
cluster-mac mac-address
undo cluster-mac
View
Cluster view
20-22