Mld Snooping Configuration Commands; Display Mld-Snooping Group - HP E4510-48G Command Reference Manual

3

MLD Snooping Configuration Commands

MLD Snooping Configuration Commands

display mld-snooping group

Syntax
display mld-snooping group [ vlan vlan-id ] [ slot slot-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan vlan-id: Displays the MLD Snooping multicast group information in the specified VLAN, where
vlan-id is in the range of 1 to 4094. If you do not specify a VLAN, this command will display the MLD
Snooping multicast group information in all VLANs.
slot slot-number: Displays information about MLD Snooping multicast groups on the specified IRF
member device. The slot-number argument is the member number of the device in the IRF, which you
can display with the display irf command. The value range for the slot-number argument depends on
the number of members and numbering conditions in the current IRF. If no IRF exists, the slot-number
argument is the current device number.
verbose: Displays the detailed MLD Snooping multicast group information.
Description
Use the display mld-snooping group command to view the MLD Snooping multicast group
information.
Examples
# View the detailed MLD Snooping multicast group information in VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
3-1