Display Nqa Server Status; Nqa Server Enable - HP E4510-48G Command Reference Manual

display nqa server status

Syntax
display nqa server status
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display nqa server status command to display NQA server status.
Examples
# Display NQA server status.
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address
2.2.2.2
udp-echo:
IP Address
3.3.3.3
Table 18-5 display nqa server status command output description
Field
tcp-connect
udp-echo
IP Address
Port
Status

nqa server enable

Syntax
nqa server enable
Port Status
2000 active
Port Status
3000 inactive
NQA server status in the NQA TCP test
NQA server status in the NQA UDP test
IP address specified for the TCP/UDP listening service on the NQA server
Port number of the TCP/UDP listening service on the NQA server
Listening service status:
active: Listening service is ready;
inactive: Listening service is not ready.
Description
18-39