Display Bgp Routing-Table Vpnv4 As-Path-Acl - HP FlexFabric 12500 Command Reference Manual

network-address: Specifies the destination network address.
mask: Specifies the network mask, in dotted decimal notation.
mask-length: Specifies the length of the network mask, in the range of 0 to 32.
Usage guidelines
If the mask and mask-length arguments are not specified, the system ANDs the specified network address
with the mask of each route. If the result matches the network address of the route, this command displays
advertisement information for the route.
If the mask or mask-length argument is specified, this command displays advertisement information for
the BGP VPNv4 route that exactly matches the specified address and mask.
Examples
# Display advertisement information for the BGP VPNv4 route destined to network 10.2.1.0/24.
<Sysname> display bgp routing-table vpnv4 10.1.1.0 24 advertise-info
BGP local router ID: 1.1.1.9
Local AS number: 100
Route distinguisher: 100:1
Total number of routes: 1
Paths:
BGP routing table information of 10.1.1.0/24:
Advertised to VPN peers (1 in total):
3.3.3.9
Inlabel

display bgp routing-table vpnv4 as-path-acl

Use display bgp routing-table vpnv4 as-path-acl to display BGP IPv4 unicast routes permitted by an AS
path ACL.
Syntax
display bgp
as-path-acl-number
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
1 best
: 1279
routing-table vpnv4 [ route-distinguisher
68
route-distinguisher ] as-path-acl