Display Cluster Members - HP E4510-48G Command Reference Manual

A new device in the topology information is identified based on the standard topology. After you add a
device into a cluster, if you do not use the topology accept command to confirm the current topology
and save it as the standard topology, this device is still regarded as a new device.

display cluster members

Syntax
display cluster members [ member-number | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
member-number: Number of the member device, in the range 0 to 31.
verbose: Displays the detailed information about all the devices in a cluster.
Description
Use the display cluster members command to display the information about cluster members.
Note that this command can be executed on the management device only.
Examples
# Display the information about all the devices in a cluster.
<aaa_0.Sysname> display cluster members
SN Device
0 Switch 4200G
2 Switch 4200G
3 Sysname S3628P
4 Switch 4200G
5 Switch 4200G
Table 20-11 display cluster members command output description
Field
SN
Device
MAC Address
MAC Address Status Name
000f-e200-1751 Admin 123_0.3100_1
000f-e200-3199 Up
00e0-fd00-0043 Up
00f-e200-2579 Up
000f-e20f-c415 Up
Member number
Device type
MAC address of a device
20-36
123_2.3100_4
123_3.S3528P
123_4.3100_2
123_5.3100_5
Description