HP E4510-48G Command Reference Manual page 998

ESC_> Specify the end of clipboard.
quit
Syntax
quit
View
Any view
Default Level
0: Visit level (in user view)
2: System level (in other views)
Parameters
None
Description
Use the quit command to exit to a lower-level view. If the current view is user view, the quit command
terminates the current connection and quit the system.
Examples
# Switch from GigabitEthernet1/0/1 interface view to system view, and then to user view.
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] quit
<Sysname>
return
Syntax
return
View
Any view except user view
Default Level
2: System level
Parameters
None
Description
Use the return command to return to user view from current view (not user view).
You can also use the hot key Ctrl+Z to return to user view from current (not user view).
Related commands: quit.
3-20