Display Mac-Address Aging-Time - HP E4510-48G Command Reference Manual

Description
Use the display mac-address command to display information about the MAC address table.
Related commands: mac-address (system view), mac-address (Ethernet interface view),
mac-address timer.
Examples
# Display the MAC address table entry for MAC address 000f-e201-0101.
<Sysname> display mac-address 000f-e201-0101
MAC ADDR
000f-e201-0101
Table 13-1 display mac-address command output description
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)

display mac-address aging-time

Syntax
display mac-address aging-time
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-address aging-time command to display the aging time of dynamic entries in
the MAC address table.
VLAN ID STATE PORT INDEX
1 Learned
MAC address
ID of the VLAN to which the MAC address belongs
State of a MAC address, includes:
Config static: static entry configured by the user manually
Config dynamic: dynamic entry configured by the user manually
Learned: entry learned by the device
Blackhole: destination blackhole entry
Source-Blackhole: source blackhole entry
Number of the port corresponding to the MAC address, that is, packets
destined to this MAC address will be sent out from this port. (Displayed as
N/A for a blackhole MAC address entry).
Aging time, which could be:
AGING, indicates that the entry is aging.
NOAGED, indicates that the entry does not age.
AGING TIME(s)
GigabitEthernet1/0/1
Description
13-2
AGING