HP E4510-48G Command Reference Manual page 417

display ip routing-table ip-address longer-match
The system ANDs the input destination IP address with the subnet mask in each route entry; and
ANDs the destination IP address in each route entry with its corresponding subnet mask.
If the two operations yield the same result for multiple entries that are active, the one with longest
mask length is displayed.
display ip routing-table ip-address mask longer-match
The system ANDs the input destination IP address with the input subnet mask; and ANDs the
destination IP address in each route entry with the input subnet mask.
If the two operations yield the same result for multiple entries with a mask less than or equal to the
input subnet mask, the one that is active with longest mask length is displayed.
Use the display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length |
mask } command to display route entries with destination addresses within a specified range.
Examples
# Display route entries for the destination IP address 11.1.1.1.
<Sysname> display ip routing-table 11.1.1.1
Routing Table : Public
Summary Count : 4
Destination/Mask
0.0.0.0/0
11.0.0.0/8
11.1.0.0/16
11.1.1.0/24
For detailed description about the output, see
# Display route entries by specifying a destination IP address and the longer-match keyword.
[Sysname] display ip routing-table 11.1.1.1 longer-match
Routing Table : Public
Summary Count : 1
Destination/Mask
11.1.1.0/24
# Display route entries by specifying a destination IP address and mask.
[Sysname] display ip routing-table 11.1.1.1 24
Routing Table : Public
Summary Count : 3
Destination/Mask
11.0.0.0/8
11.1.0.0/16
11.1.1.0/24
Proto Pre Cost
Static 60 0
Static 60 0
Static 60 0
Static 60 0
Proto Pre Cost
Static 60 0
Proto Pre Cost
Static 60 0
Static 60 0
Static 60 0
NextHop Interface
0.0.0.0 NULL0
0.0.0.0 NULL0
0.0.0.0 NULL0
0.0.0.0 NULL0
Table 1-1.
NextHop Interface
0.0.0.0 NULL0
NextHop Interface
0.0.0.0 NULL0
0.0.0.0 NULL0
0.0.0.0 NULL0
1-8