Command Authorization; Databits - HP E4510-48G Command Reference Manual

Examples
# Enable command accounting for VTY 0. Then the HWTACACS server records the commands
executed by the users logging in from VTY 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command accounting

command authorization

Syntax
command authorization
undo command authorization
View
User interface view
Default Level
3: Manage level
Parameters
None
Description
Use the command authorization command to enable command authorization.
Use the undo command authorization command to restore the default.
By default, command authorization is disabled, that is, logged-in users can execute commands without
authorization.
With command authorization enabled, users logging in from the current user interface can perform
commands authorized by the server.
Examples
# Enable command accounting for VTY 0. Then users logging in through VTY 0 can perform the
commands authorized by the HWTACACS server only.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command authorization

databits

Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
View
AUX interface view
1-5