Rmon Configuration Commands - HP E4510-48G Command Reference Manual

12

RMON Configuration Commands

RMON Configuration Commands
display rmon alarm
Syntax
display rmon alarm [ entry-number ]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is specified, the
configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of the specified or all RMON alarm
entries.
Related commands: rmon alarm.
Examples
# Display the configuration of all RMON alarm table entries.
<Sysname> display rmon alarm
AlarmEntry 1 owned by user1 is VALID.
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables : risingOrFallingAlarm
Latest value
Table 12-1 display rmon alarm command output description
Field
AlarmEntry
owned by
: absolute
: 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
: 10(sec)
: 50(linked with event 1)
: 5(linked with event 2)
: 0
Alarm entry, corresponding to the management information base (MIB)
node alarmIndex.
Owner of the entry, user1 in this example, corresponding to the MIB
node alarmOwner.
12-1
Description