Bootrom-Update Security-Check Enable; Display Boot-Loader - HP E4510-48G Command Reference Manual

# Use the a.btm file to upgrade the Boot ROM program on the slave (the member ID is 2).
<Sysname> bootrom update file slot2#flash:/a.btm slot 2
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Succeeded to update bootrom of Board 1

bootrom-update security-check enable

Syntax
bootrom-update security-check enable
undo bootrom-update security-check enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the bootrom-update security-check enable command to enable the validity check function.
Use the undo bootrom-update security-check enable command to disable the validity check
function.
By default, the validity check function is enabled at the time of upgrading Boot ROM.
After the validity check function is enabled, the device will strictly check whether the Boot ROM
upgrade files are valid and can match the hardware.
Examples
# Enable the validity check function when upgrading Boot ROM.
<Sysname> system-view
[Sysname] bootrom-update security-check enable

display boot-loader

Syntax
display boot-loader [ slot slot-number ]
View
Any view
Default Level
2: System level
4-4