undo nqa server enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the nqa server enable command to enable the NQA server.
Use the undo nqa server enable command to disable the NQA server.
By default, the NQA server is disabled.
Related commands: nqa server tcp-connect, nqa server udp-echo and display nqa server status.
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
nqa server tcp-connect
Syntax
nqa server tcp-connect ip-address port-number
undo nqa server tcp-connect ip-address port-number
View
System view
Default Level
2: System level
Parameters
ip-address: IP address specified for the TCP listening service on the NQA server.
port-number: Port number specified for the TCP listening service on the NQA server, in the range 1 to
50000.-
Description
Use the nqa-server tcp-connect command to create a TCP listening service on the NQA server.
Use the undo nqa-server tcp-connect command to remove the TCP listening service created.
Note that:
You need to configure the command on the NQA server for TCP tests only.
18-40