Pki Entity - HP E4510-48G Command Reference Manual

Parameters
domain-name: PKI domain name, a case-insensitive string of 1 to 15 characters.
Description
Use the pki domain command to create a PKI domain and enter PKI domain view or enter the view of
an existing PKI domain.
Use the undo pki domain command to remove a PKI domain.
By default, no PKI domain exists.
Examples
# Create a PKI domain and enter its view.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1]

pki entity

Syntax
pki entity entity-name
undo pki entity entity-name
View
System view
Default Level
2: System level
Parameters
entity-name: Name for the entity, a case-insensitive string of 1 to 15 characters.
Description
Use the pki entity command to create a PKI entity and enter PKI entity view.
Use the undo pki entity command to remove a PKI entity.
By default, no entity exists.
You can configure a variety of attributes for an entity in PKI entity view. An entity is intended only for
convenience of reference by other commands.
Examples
# Create a PKI entity named en and enter its view.
<Sysname> system-view
[Sysname] pki entity en
[Sysname-pki-entity-en]
11-20