Cluster-Snmp-Agent Mib-View Included; Cluster-Snmp-Agent Usm-User V - HP E4510-48G Command Reference Manual

cluster-snmp-agent mib-view included

Syntax
cluster-snmp-agent mib-view included view-name oid-tree
undo cluster-snmp-agent mib-view view-name
View
Cluster view
Default Level
1: Monitor level
Parameters
view-name: MIB view name, a string of 1 to 32 characters.
oid-tree: MIB subtree, a string of 1 to 255 characters, which can only be a variable OID string or
variable name string. OID is composed of a series of integers, indicating where a node is in the MIB
tree. It can uniquely identify an object in a MIB.
Description
Use the cluster-snmp-agent mib-view included command to create or update the MIB view
information shared by a cluster.
Use the undo cluster-snmp-agent mib-view command to delete the MIB view information shared by
a cluster.
By default, the MIB view name shared by a cluster is ViewDefault, in which the cluster can access ISO
subtree.
Note that:
This command can be executed once on the management device only. This configuration will be
synchronized to member devices on the whitelist, which is equal to configuring multiple member
devices at one time.
The MIB view will be retained if a cluster is dismissed or a member device is deleted from the
whitelist.
If the same view name as the current one has been configured on a member device, the current
view will replace the original one on the member device.
Examples
# Create a view including all objects of mib2.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-snmp-agent mib-view included mib2 1.3.6.1.2.1

cluster-snmp-agent usm-user v3

Syntax
cluster-snmp-agent usm-user v3 user-name group-name [ authentication-mode { md5 | sha }
auth-password ] [ privacy-mode des56 priv-password ]
20-26