Ssh Server Authentication-Timeout - HP E4510-48G Command Reference Manual

Parameters
times: Maximum number of authentication attempts, in the range 1 to 5.
Description
Use the ssh server authentication-retries command to set the maximum number of SSH connection
authentication attempts, which takes effect at next login.
Use the undo ssh server authentication-retries command to restore the default.
By default, the maximum number of SSH connection authentication attempts is 3.
Note that:
Authentication will fail if the number of authentication attempts (including both publickey and
password authentication) exceeds that specified in the ssh server authentication-retries
command.
If the authentication method of SSH users is password-publickey, the maximum number of SSH
connection authentication attempts must be at least 2. This is because SSH2.0 users must pass
both password and publickey authentication.
Related commands: display ssh server.
Examples
# Set the maximum number of SSH connection authentication attempts to 4.
<Sysname> system-view
[Sysname] ssh server authentication-retries 4

ssh server authentication-timeout

Syntax
ssh server authentication-timeout time-out-value
undo ssh server authentication-timeout
View
System view
Default Level
2: System level
Parameters
time-out-value: Authentication timeout period in seconds, in the range 1 to 120.
Description
Use the ssh server authentication-timeout command to set the SSH user authentication timeout
period on the SSH server.
Use the undo ssh server authentication-timeout command to restore the default.
By default, the authentication timeout period is 60 seconds.
Related commands: display ssh server.
10-4