Device Management Commands - HP E4510-48G Command Reference Manual

4

Device Management Commands

Device Management Commands
boot-loader file
Syntax
boot-loader file file-url slot { all | slot-number } { main | backup }
View
User view
Default Level
2: System level
Parameters
file-url: Specifies a file name, a string of 1 to 63 characters, in the format of [drive:/][path/]file-name,
where
The items in square brackets [ ] are optional.
drive specifies the storage medium of the file. The value is the name of the storage medium. For
the switch 4510G, the storage medium can only be a flash.
path specifies the folder of the file. If you do not provide this argument, the file must be in the root
directory of the specified storage medium. If the file is saved in a subfolder, you can use this
argument multi-times, for example, test/subtest/test.bin.
file-name specifies the filename, which is usually suffixed by .bin. Suffixes vary with devices.
If you do not provide arguments drive and path, the file with the name file-name under the current
path is specified. You can use the cd command to switch to another path. For details of the cd
command, refer to File System Management Commands in the System Volume.
slot slot-number: Specifies the member ID of a device.
all: Specifies a file as the boot file at the next boot for all member devices in a stack system.
slot-number: Specifies a file as the boot file at the next boot for a member device. slot-number is
the member ID of the device. You can use the display irf command to view the member IDs of
devices in a stack system.
main: Specifies a file as a main boot file. A main boot file is used to boot a device.
backup: Specifies a file as a backup boot file. A backup boot file is used to boot a device only when a
main boot file is unavailable.
Description
Use the boot-loader command to specify a boot file for a member device for the next device boot.
Note the following:
4-1