Table of Contents
Advertisement
user privilege level 3
#
return
display default-configuration
Syntax
display default-configuration
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display default-configuration command to display the factory defaults of a device. The
command displays all commands to be executed when the device boots with the factory defaults.
Related commands: display current-configuration, display saved-configuration.
Examples
# Display the factory defaults of the device (The factory defaults vary with device models. The detailed
displays are omitted here).
<Sysname> display default-configuration
display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display diagnostic-information command to display or save the statistics of each module's
running status in the system.
When the system is out of order, you need to collect a lot of information to locate the problem. At this
time you can use the display diagnostic-information command to display or save the statistics of
3-12
Advertisement
Chapters
Table of Contents
