Mac-Address Information Queue-Length - HP E4510-48G Command Reference Manual

mac-address information queue-length

Syntax
mac-address information queue-length value
undo mac-address information queue-length
View
System view
Default Level
2: System level
Parameters
value: MAC Information queue length. The value range is 0 to 1000.
Description
Use the mac-address information queue-length command to set the MAC Information queue
length.
Use the undo mac-address information queue-length command to restore the default.
By default, the MAC Information queue length is 50.
Setting the MAC Information queue length to 0 indicates that the device sends a Syslog or Trap
message to the network management device as soon as a new MAC address is learned or an existing
MAC address is deleted.
Examples
# Set the MAC Information queue length to 600.
<Sysname> system-view
[Sysname] mac-address information queue-length 600
14-4