Retry Stop-Accounting (Hwtacacs Scheme View) - HP E4510-48G Command Reference Manual

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies a HWTACACS scheme by its name, a string of
1 to 32 characters.
slot slot-number: Specifies the specified member device in an IRF. The slot-number argument
indicates the member device ID.
Description
Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests that
get no responses.
Related commands:
stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1

retry stop-accounting (HWTACACS scheme view)

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Default Level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts. It ranges from 1 to
300 and defaults to 100.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting request
transmission attempts.
Use the undo retry stop-accounting command to restore the default.
Related commands:
stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 50.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50
stop-accounting-buffer
reset stop-accounting-buffer,
3-11
enable, retry stop-accounting,
hwtacacs
display
scheme, display