HP E4510-48G Command Reference Manual page 899

Remote Evaluating
Packets statistic :
Packets
--------------------------------------------------------------------------
OAMPDU
OAMInformation
OAMEventNotification
OAMUniqueEventNotification
OAMDuplicateEventNotification --
Table 5-1 display oam local command output description
Field
Port
Link Status
EnableStatus
Local_oam_mode
Local_pdu
Local_mux_action
Local_par_action
OAMLocalFlagsField
Link Fault
Dying Gasp
Critical Event
: COMPLETE
Send
645
645
0
--
Port index
Link status
Ethernet OAM state (enabled or disabled)
Local Ethernet OAM mode, which can be:
Active, indicating the port operates in the active Ethernet OAM
mode
Passive, indicating the port operates in the passive Ethernet
OAM mode
The way in which the local end processes Ethernet OAMPDUs:
RX_INFO, indicating the port only receives Information
OAMPDUs and does not send any Ethernet OAMPDUs.
LF_INFO, indicating the port only sends the Information
OAMPDUs without Information TLV triplets and with their link
error flag bits being set.
INFO, indicating the port sends and receives only Information
OAMPDUs.
ANY, indicating the port sends and receives Ethernet
OAMPDUs of any type.
Working mode of the local transmitter, which can be:
FWD, indicating the port can send any packets.
DISCARD, indicating the port only sends Ethernet OAMPDUs.
Working mode of the local receiver, which can be:
FWD, indicating the port can receive any packets.
DISCARD, indicating the port only receives Ethernet
OAMPDUs.
LB, indicating Ethernet OAM loopback testing is enabled on
the port. In this case, all the packets other than Ethernet
OAMPDUs received are returned to their sources along the
ways they come.
Local flags inserted in the local flag fields of the Ethernet
OAMPDUs sent.
Indicates whether an Ethernet OAM link error is present: 0 for no
and 1 for yes.
Indicates whether a fatal error is present: 0 for no and 1 for yes.
Indicates whether a critical error is present: 0 for no and 1 for yes.
5-2
Receive
648
648
--
0
0
Description