Display Info-Center - HP E4510-48G Command Reference Manual

channel number:0, channel name:console
MODU_ID NAME
ffff0000 default Y
The above information indicates to output log information with the severity from 0 to 4, trap information
with the severity from 0 to 7 and debugging information with the severity from 0 to 7 to the console.
The information source modules are all modules (default).
Table 16-2 display channel command output description
Field
channel number
channel name
MODU_ID
NAME
ENABLE
LOG_LEVEL
ENABLE
TRAP_LEVEL
ENABLE
DEBUG_LEVEL

display info-center

Syntax
display info-center
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display info-center command to display the information of each output destination.
ENABLE LOG_LEVEL ENABLE TRAP_LEVEL
warnings Y
A specified channel number, in the range 0 to 9.
A specified channel name, which varies with user's configuration. For
more information, refer to the info-center channel name command.
The ID of the module to which the information permitted to pass through
the current channel belongs
The name of the module to which the information permitted to pass
through the current channel belongs
Default means all modules are allowed to output system information, but
the module type varies with devices.
Indicates whether to enable or disable the output of log information,
which could be Y or N.
The severity of log information, refer to
Indicates whether to enable or disable the output of trap information,
which could be Y or N.
The severity of trap information, refer to
Indicates whether to enable or disable the output of debugging
information, which could be Y or N.
The severity of debugging information, refer to
ENABLE DEBUG_LEVEL
debugging Y
Description
Table 16-4
Table 16-4
16-2
debugging
for details.
for details.
Table 16-4 for details.