HP E4510-48G Command Reference Manual page 1312

Default Level
2: System level
Parameters
ftp-server: Saves the standard topology information to the FTP server.
local-flash: Saves the standard topology information to the local flash.
Description
Use the topology save-to command to save the standard topology information to the FTP server or
the local flash.
Note that:
The file used to save standard topology on the FTP server or the local flash is named
"topology.top", which includes both the information of blacklist and whitelist. A blacklist contains
the devices that are prohibited to be added to a cluster. A whitelist contains devices that can be
added to a cluster.
This command can be executed on the management device only.
Examples
# Save the standard topology information to the local flash.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] topology save-to local-flash
20-48