HP E4510-48G Command Reference Manual page 878

Examples
# Display the detailed information of ring 1 in RRPP domain 1.
<Sysname> display rrpp verbose domain 1 ring 1
Domain ID : 1
Control VLAN : Major 5
Protected VLAN: Reference Instance 0 to 2, 4
Hello Timer : 1 sec Fail Timer : 3 sec
Ring ID : 1
Ring Level : 1
Node Mode : Master
Ring State : Complete
Enable Status : Yes
Primary port : GigabitEthernet1/0/1
Secondary port: GigabitEthernet1/0/2
# Display the detailed information of all the rings in RRPP domain 2.
<Sysname> display rrpp verbose domain 2
Domain ID : 2
Control VLAN : Major 10
Protected VLAN: Reference Instance 3, 5 to 7
Hello Timer : 1 sec Fail Timer : 3 sec
Ring ID : 1
Ring Level : 0
Node Mode : Master
Ring State : Complete
Enable Status : Yes
Primary port : GigabitEthernet1/0/4
Secondary port: GigabitEthernet1/0/5
Ring ID : 2
Ring Level : 1
Node Mode : Edge
Ring State : -
Enable Status : No
Common port : GigabitEthernet1/0/4
GigabitEthernet1/0/5
Edge port : GigabitEthernet1/0/3
Table 3-4 display rrpp verbose command output description
Field
Domain ID
Control VLAN
Sub 6
Active Status: Yes
Sub 11
Active Status: Yes
Active Status: No
RRPP domain ID
Control VLANs of the RRPP domain:
Major: Represents the primary control VLAN
Sub: Represents the secondary control VLAN
3-8
Port status: UP
Port status: BLOCKED
Port status: UP
Port status: BLOCKED
Port status: -
Port status: -
Port status: -
Description