Qos Bandwidth Queue; Qos Sp - HP E4510-48G Command Reference Manual

qos bandwidth queue

Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id [ min bandwidth-value ]
View
Ethernet interface view, port group view
Default Level
2: System level
Parameters
queue-id: Queue ID, in the range of 0 to 7.
bandwidth-value: Minimum guaranteed bandwidth (in kbps), that is, the minimum bandwidth
guaranteed for a queue when the port is congested. The range for the bandwidth-value argument is 64
to 1048576.
Description
Use the qos bandwidth queue command to set the minimum guaranteed bandwidth for a specified
queue on the port or ports in the port group.
Use the undo qos bandwidth queue command to remove the configuration.
By default, the minimum guaranteed bandwidth of a queue is 64 kbps.
Note that:
In Ethernet interface view, the configuration takes effect only on the current port; in port group
view, the configuration takes effect on all ports in the port group.
To configure minimum guaranteed bandwidth for queues on a port/port group, enable WFQ on the
port/port group first.
Examples
# Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet 1/0/1] qos wfq
[Sysname-GigabitEthernet 1/0/1] qos bandwidth queue 0 min 100

qos sp

Syntax
qos sp
undo qos sp
View
Ethernet interface view, port group view
4-4