HP E4510-48G Command Reference Manual page 676

View
Any view
Default Level
2: System level
Parameters
hwtacacs-scheme-name: HWTACACS scheme name.
statistics: Displays complete statistics about the HWTACACS server.
slot slot-number: Specifies the specified member device in an IRF. The slot-number argument
indicates the member device ID.
Description
Use the display hwtacacs command to display configuration information or statistics of the specified
or all HWTACACS schemes.
Note that:
If no HWTACACS scheme is specified, the command will display the configuration information of
all HWTACACS schemes.
If no slot number is specified, the command will display the configuration information of the
HWTACACS scheme on the main processing unit.
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
NAS-IP-address
key authentication
key authorization
key accounting
Quiet-interval(min)
Realtime-accounting-interval(min) : 12
Response-timeout-interval(sec)
Acct-stop-PKT retransmit times
Username format
Data traffic-unit
: gy
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
: 0.0.0.0:0
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0
: 790131
: 790131
: 790131
: 5
: 5
: 100
: with-domain
: B
3-2