Moving An Asset To A Node; Submitting Measurement Data By Email; Submitting Measurement Data With Ftps (File Transfer Protocol Secure) - Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual

7.5

Moving an Asset to a Node

Before you start
• Log on at IIoT web application (http://www.siemens.com/mag8000iiotwebapplication).
• Create at least one Node. (Page 34)
Procedure
1. Click on "Administration".
2. Click on "Asset".
3. Select an Asset.
4. Click on "Move".
5. Select the Node to which you want to move your Asset.
6. Click on "Move".
7.6

Submitting measurement data by email

Before you start
• Register your device: Registering your device (Page 29)
• Log on at IIoT web application (http://www.siemens.com/mag8000iiotwebapplication).
Procedure
1. Click on "Administration".
2. Select an Asset.
3. Click on the email button
4. Click on "Add Entry"
5. Enter your email address in the new line.
6. Click on "Confirm".
7.7 Submitting measurement data with FTPS (File Transfer Protocol
Secure)
Before you start
• Register your device: Registering your device (Page 29)
• Log on at IIoT web application (http://www.siemens.com/mag8000iiotwebapplication).
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA

7.7 Submitting measurement data with FTPS (File Transfer Protocol Secure)

in the lower right corner.
Operating
35