Integrating The 3Rw5 Soft Starter With Eds File Into The Ethernet/Ip System - Siemens SIRIUS 3RW5 Equipment Manual

6.2.2

Integrating the 3RW5 soft starter with EDS file into the EtherNet/IP system

Requirements
● Configuration software of the controller, e.g. Rockwell Studio 5000
● EDS file
You will find the latest EtherNet/IP EDS file on the 3RW5 topic page
(https://support.industry.siemens.com/cs/ww/en/view/109747404).
Procedure
1. Install the EDS file.
2. Select the 3RW5 Soft Starter in the configuration software of the controller.
3. Insert the 3RW5 soft starter in the EtherNet/IP system.
Result
The 3RW5 Soft Starter is integrated into the EtherNet/IP system as an adapter in the
configuration software of the controller.
SIRIUS 3RW5 EtherNet/IP communication module
Equipment Manual, 03/2020, A5E45131885002A/RS-AB/002
6.2 Configuring the 3RW5 soft starter
Configuring
69