Parameter Data Record; Dependencies When Configuring With Gsd File - Siemens SIMATIC ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD file

When configuring the module with a GSD file, remember that the settings of some
parameters are dependent on each other.
Configuring with a PROFINET GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range with PROFINET.
Measurement Measuring
type range
Deactivated
Current 0 to 20 mA
(4-wire connec-
4 to 20 mA
tion)
±20 mA
Current 0 to 20 mA
(2-wire connec-
4 to 20 mA
tion)
x = Property is allowed, - = Property is not allowed, * = Property is not relevant
Configuring with a PROFIBUS GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range with PROFIBUS.
Measurement type Measuring range
Deactivated
Current 0 to 20 mA
(4-wire connection)
4 to 20 mA
±20 mA
Current 0 to 20 mA
(2-wire connection)
4 to 20 mA
x = Property is allowed, - = Property is not allowed, * = Property is not relevant
Analog input module AI 8xI 2-/4-wire BA (6ES7134-6GF00-0AA1)
Manual, 03/2015, A5E34941201-AA
No supply volt- Short-circuit to
age L+ ground
* *
x x
x x
x x
x x
x x
No supply voltage
L+
*
x
x
x
x
x
Diagnostics
Overflow
*
x
x
x
x
x
Diagnostics
Short-circuit to Over-
ground flow/underflow
* *
x x
x x
x x
x x
x x
Underflow Wire break
* *
x -
x x
x -
- -
x x
Wire break
*
-
x
-
-
x
A
27