About This Manual; Contents - Siemens SIDOOR ATD4 W Series System Manual

Introduction

1.2 About this manual

• Thanks to the independence of the door system, SIDOOR is highly flexible and can be easily
expanded with modular communication interfaces. SIDOOR door controllers can be
completely controlled by a SIMATIC S7 controller. Control, parameterization and diagnostics
takes place via PROFIBUS or PROFINET.
• The system's reliability, ruggedness and long-term precision minimize the need for
maintenance and repair work. Obstruction and belt tear detection provides more safety.
See also
SIDOOR homepage (http://www.siemens.com/sidoor)
1.2 About this manual
1.2.1

Contents

Content of the System Manual
This system manual describes:
• The ATD401W, ATD420W and ATD430W control units, which you use for industrial
applications.
• Geared motors, power supplies, additional units that you can use with the control units.
Firmware versions
This system manual applies to SIDOOR ATD401W, ATD420W and ATD430W industrial door
control units with firmware version 1.12 or higher.
Note
You will find the current firmware versions for SIDOOR ATD4xxW control unit at Industry Online
Support (http://support.automation.siemens.com/WW/view/en/50247080/133100).
Figures
The illustrations in this system manual represent SIDOOR User Software Version 1.2, the SIDOOR
control unit and SIDOOR SUPPORT App Version 1.0. The illustrations for earlier product versions
may differ slightly.
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
12
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA