Unpacking - ABB OmniCore V250XT Type B Product Manual

3 Installation and commissioning

3.3.2 Unpacking

3.3.2 Unpacking
Unpacking the controller
1
2
3
4
5
6
7
8
56
Action
Make a visual inspection of the packaging and make sure that nothing is damaged.
Remove the packaging.
Check for any visible transport damage.
Note
Stop unpacking and contact ABB if transport damage is found.
Clean the unit with a lint-free cloth, if necessary.
Make sure that the lifting accessory used (if applicable) is suitable to handle the weight
of the controller.
If the controller is not installed directly, it must be stored as described in
and storage conditions on page
Make sure that the expected operating environment of the controller conforms to the
specifications as described in
The controller can be taken to its installation site as described in section
stallation on page 58.
© Copyright 2023-2023 ABB. All rights reserved.
39.
Operating conditions on page
Product manual - OmniCore V250XT Type B
Transportation
39.
On-site in-
3HAC087112-001 Revision: A